Self-Regulating Heat Tracing 49W HTSX 15-2 OJ ( 49W/m)
SELF-REGULATING HEAT TRACING 49W
General
-Area classification: Class I, Zones 1 and 2, AEx e II Specification
-Supply voltage: 220VAC
-Parallel circuit heating cable
-Construction: Copper conductors 2.0mm 2 min./ (self-regulating conductive core)/ Fluoropolymer insulation/ Copper braid/ Fluoropolymer outer jacket.
-Maximum exposure temperature (continuous power on): 260°C
-Temperature classification: T2 -Nominal power output: 49W/m @10°C
Surface Sensing Electronic Thermostat ZT-C-100-P-XP
Enclosure rating……………………………………………….. IP66
Maximum pipe exposure temperature…………….. 250°C
Minimum installation temperature…………………….-60°C
Operating ambient temperature
-60°C ≤ Ta ≤ +55°C……………….16 Amps Max, T6 85°C
-60°C ≤ Ta ≤ +50°C……………..25 Amps Max, T5 100°C
Voltage rating………….. 230 Vac nominal up to 253 Vac1
Switch rating ………………………25 A (Ohmic, NC contact)
Switch type……………………………………………… Controller
Electrical connection2………………………..Terminal block3
Adjustable control range4 ZT-C-100 ……………………………………….. 0°C to 100°C
Maximum control differential/accuracy ZT-C-100 …………………………………..7% / -1 K to +7 K
Maximum bulb exposure temperature ZT-C-100 …………………………………………………. 230°C
Bulb dimensions/material/capillary length ZT-C-100 ………………… 6 x 76 mm/stainless steel/1 m
Low-Profile End Seal Kit ZE-XP End Terminator Kit
Low-Profile End Seal Kit
– Area classification: Class I, Zone 2, Gas group IIA, Temperature Class T3
– Use for heating cable in item 1.
– Explosion protection: Ex ‘e’
– Degree of protection: IP56 as minimum
– Maximum pipe temperature: 110°C
– Operating voltage: 220VAC ± 5%
– Materials of construction Enclosure, end plate, and shim: engineering polymers, black
o Sealing grommet and core sealer: Silicone rubber
o Screws, compression spring, reinforcement plate: stainless steel
Fixing Tape
FT-1L Glass cloth tape for attaching heating cable to pipe (not for stainlesssteel pipes),
– Length 33m/roll – Width: 12mm
Pipe Strap
B-10 banding Pipe Strap stainless steel 2 in to 10 in
Warning Label
CL-E-US-END Warning Label
– Electric Traced Label for traced pipes.
– Language: English
Tank Adapter
XP-1-150 x 150 Tank adapter is used for mounting junction box, end seal kit on the tank surface.
Heat Trace HTSX – Dây gia nhiệt, cáp gia nhiệt, cáp duy trì nhiệt độ Thermon 2023
Giải pháp duy trì nhiệt độ cho lưu chất sáp định hình – Heat trace KSX/Thermon USA
Heat Trace – Dây gia nhiệt chống đông chất lỏng và kiểm soát nhiệt độ của đường ống
Liên hệ:
Công ty TNHH Wili Việt Nam
Email: Hung.tran@wili.com.vn
SDT: 0903 710 753
